MXR MC404 CAE Crybaby Dual Inductor Wah + Power Supply + Patch Cables

Description

ProAudioStar
DJ GEAR
INSTRUMENT GEAR
LIVE SOUND
RECORDING
MICROPHONES
HEADPHONES
ACCESSORIES
SOFTWARE
LIGHTING
BUNDLES
Authorized Dealer - Full Warranty
MXR MC404 CAE Crybaby Dual Inductor Wah + Power Supply + Patch Cables
Dual Inductor Wah Pedal + 9V Power Supply + 1' Patch Cables (x2)
- Bundle Deal -
Description
Product Description For MXR MC404 CAE Crybaby Dual Inductor Wah Pedal, Dunlop 9V Power Supply and
MXR DCP1 1ft Patch Cable
Package Includes :
1 X MXR MC404 CAE Crybaby Dual Inductor Wah Pedal
1 X Dunlop 9V Power Supply
2 X MXR DCP1 1ft Patch Cable
MXR MC404 CAE Crybaby Dual Inductor Wah Pedal
The CAE Wah allows you to switch between two distinctly-voiced Fasel Inductors with a built-in Boost/Line Driver circuit, internal Q and gain controls, and bright status LEDs on each side of the pedal.
The MC404 CAE Wah was developed by Bob Bradshaw of Custom Audio Electronics and the Cry Baby design team with the goal of creating a highly versatile wah-wah of top-grade components. It features dual Fasel inductors with two distinct voices (high-end emphasis or low to mid resonance), and a built-in MXR MC401 Boost/LineDriver adds even more flexibility. Choose between inductors and turn the boost on or off with the side-mounted kick switches; bright LEDs on each side of the wah indicate operation status. The MC404 boasts true hardwire bypass, a long-life CTS potentiometer, and internal pots for Q and gain adjustments.
Dunlop 9V Power Supply
This AC adapter provides 9V DC current for most pedals requiring 9 volts of power. Check specifications to make sure this adapter is the right fit for your pedal.
MXR DCP1 1ft Patch Cable
These patch cables are MXR-approved for clean, pure tone. They feature oxygen-free copper conductors and spiral shields to block unwanted interference, PVC outer jackets for flexibility and protection, and flat, low-profile right-angle ends to keep your pedalboard tight and tidy.
Features/Specs
MXR MC404 CAE Crybaby Dual Inductor Wah Pedal
Power
The MC404 CAE Wah is powered by one 9-volt battery (accessed via the bottom of the pedal), a 9-volt AC Adapter such as the Dunlop ECB003/ECB003EU or a DC Brick power supply
Setup Instructions
Run a shielded instrument cable from your guitar to the MC404’s INSTRUMENT jack and run another instrument cable from the MC404’s AMPLIFIER jack to your amp.
To turn the pedal on/off, push the toe of the pedal down until you feel a “click.” Illuminated green LED indicates “on.”
For a classic Cry Baby sound, engage the yellow Fasel inductor by pushing the INDUCTOR switch to its “in” position (indicated by illuminated yellow LED).
For a deeper wah sound with increased fundamental, engage the red Fasel inductor by setting the INDUCTOR switch to its “out” position (indicated by illuminated red LED).
To boost your wah signal, push in the BOOST switch (indicated by an illuminated blue LED) and use the BOOST VOLUME knob to set the desired boost level (up to +20dB).
Use internal trimpots to adjust the Q of each Fasel inductor—rotate clockwise for a narrower bandpass or counter-clockwise for a wider bandpass.
Located under the rocker at the heel of the pedal is an adjustable torque clutch that allows the amount of resistance the rocker has to be moved. Turn clockwise to increase resistance or counterclockwise to decrease resistance. (Wrench included).
Controls
BOOST VOLUME knob controls the amount of gain added by BOOST switch
UPPER TRIMPOT controls Q of a yellow inductor
LOWER TRIMPOT controls Q of a red inductor
INDUCTOR switch toggles red/yellow inductors
BOOST switch engages boost level set by BOOST VOLUME knob
Specifications
Impedance
Input : 1 MΩ
Output : <10 kΩ
Center Freq. (Yellow Inductor)
Heel Down : 400 Hz
Toe Down : 1.9 kHz to 2.2 kHz
Center Freq. (Red Inductor)
Heel Down : 255 Hz to 355 Hz
Toe Down : 1.3 kHz to 1.5 kHz
Maximum Level
Input : -6 dBV
Output : +8 dBV
Maximum Gain
Heel Down : +16 dB
Toe Down : +16 dB
Noise Floor
Heel Down : -85.5 dBV
Toe Down : -82.0 dBV
Bypass : True Bypass
Current Draw : <6.3 m
Dunlop 9V Power Supply
9VDC 200mA
5% regulated
2.1 mm x 5.5mm
Positive barrel, negative center
MXR DCP1 1ft Patch Cable
These patch cables are MXR-approved for clean, pure tone.
They feature oxygen-free copper conductors and spiral shields.
We are authorized dealers for all these brands. Click a logo to see our listings.
ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge.
If an item is refused by the buyer, ship costs to and from the destination in which the item was shipped to are not refunded. Please note the cost of return shipping is usually double of what the original ship cost.
Shipping is not free to HI, AK, and PR. FREE SHIPPING ONLY TO THE LOWER 48 STATES.
We provide free shipping to the contiguous 48 United States, on most items.
Shipping fees to ALL OTHER LOCATIONS will be calculated individually and added to customer invoices. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. In the event that the customer refuses a shipment, all shipping costs to and from the country or State in which the item was shipped to are not refunded. Please note, in some cases return shipping can cost as much as double the original ship cost.
We operate a 30-day return period. Items must be returned with all original packaging as well as all included items. Items that are not returned in original, resalable condition are subject to a 15% restocking fee. We charge a 15% restocking fee on returned items only if the item is clearly used and or the packaging is tarnished. A 10% re-stock is more likely if the unit comes back in mint condition. The ship cost we paid to ship your item will be deducted as well. In some cases restock fees and ship costs can be applied as a store credit.
We will exchange a defective unit for the same unit within the 30-day period. After that period, you will have to work directly with the manufacturer for warranty service.
Items that can not be returned include: software, units with contents or packaging that is damaged/missing, and items that are considered for personal use (such as earphones, headphones, microphones, instrument mouthpieces, harmonicas or other items that you wouldn't want to purchase if someone else had previously used them). Also, Items which we do not normally stock (i.e. "Special Orders", discontinued products, close-outs, used products, etc.) are non-returnable. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order.
Please contact us for a Return Authorization before returning any items.